Gvrp; 3-13.1 Configuration - Manufacture Technology GEFXL2-CSW28KX User Manual

3-13 GVRP

GVRP is an application based on Generic Attribute Registration Protocol (GARP), mainly
used to automatically and dynamically maintain the group membership information of the
VLANs. The GVRP offers the function providing the VLAN registration service through a
GARP application. It makes use of GARP Information Declaration (GID) to maintain the ports
associated with their attribute database and GARP Information Propagation (GIP) to
communicate among switches and end stations. With GID information and GIP, GVRP state
machine maintain the contents of Dynamic VLAN Registration Entries for each VLAN and
propagate these information to other GVRP-aware devices to setup and update their
knowledge database, the set of VLANs associated with currently active members, and
through which ports these members can be reached.

3-13.1 Configuration

This page allows you to configure the basic GVRP Configuration settings for all switch
ports.The settings relate to the currently selected stack unit, as reflected by the page header.
Web Interface
To configure GVRP Port Configuration in the web interface:
1. Click GVRP configure.
2. Specify GVRP Configuration Parameters..
3. Click Save.
Figure 3-13.1: The GVRP Global Configuration
Parameter description:
GVRP Mode :

GVRP Mode is a global setting, to enable the GVRP globally select 'Enable' from menu
and to disable GVRP globally select 'Disable'. In stacking, this configuration command
sends message to all the slaves connected in stack.
Default value of Global MVRP Mode is 'Disable'
Port :

The Port coulmn shows the list of ports for which you can configure per port GVRP settings.
There are three configuration settings which can be configured on per port bases.
157
Publication date: March, 2012
Revision A1