Https - Manufacture Technology GEFXL2-CSW28KX User Manual

4-10 HTTPs

This section shows you how to use HTTPS to securely access the Switch. HTTPS is a secure
communication protocol that combines authentication and data encryption to provide secure
encrypted communication via the browser.
Web Interface
To configure a HTTPS Configuration in the web interface:
1. Select "Enabled" in the Mode of
2. Select "Enabled" in the Automatic Redirect of
3. Click Save.
Figure 4-10.1: The HTTPS Configuration
Parameter description:
Mode :

Indicates the HTTPS mode operation. Possible modes are:
Enabled: Enable HTTPS mode operation.
Disabled: Disable HTTPS mode operation.
Automatic Redirect :

Indicates the HTTPS redirect mode operation. Automatically redirect web browser to
HTTPS when HTTPS mode is enabled. Possible modes are:
Enabled: Enable HTTPS redirect mode operation.
Disabled: Disable HTTPS redirect mode operation.
Configuration.
HTTPS
Configuration.
HTTPS
270 Publication date: March, 2012
Revision A1