Diagmostics; 5-5.1 Ping - Manufacture Technology GEFXL2-CSW28KX User Manual

5-5 Diagmostics

This section provides a set of basic system diagnosis. It let users know that whether the
system is health or needs to be fixed. The basic system check includes ICMP Ping, ICMPv6,
and VeriPHY Cable

5-5.1 Ping

This section allows you to issue ICMP PING packets to troubleshoot IPv6 connectivity issues.
Web Interface
To configure an ICMP PING Configuration in the web interface:
1.Specify ICMP PING IP Address.
2.Specify ICMP PING Size.
3.Click Start.
Figure 5-5.1: The ICMP Ping
Parameter description:
IP Address :

To set the IP Address of device what you want to ping it.
Ping Size:

To set the ICMP Packet size to ping the other device.
Start:

Click the "Start" button then the switch will start to ping the device using ICMP packet size
what set on the switch.
After you press , 5 ICMP packets are transmitted, and the sequence number and roundtrip
time are displayed upon reception of a reply. The page refreshes automatically until
responses to all packets are received, or until a timeout occurs.
PING6 server ::10.10.132.20
64 bytes from ::10.10.132.20: icmp_seq=0, time=0ms
64 bytes from ::10.10.132.20: icmp_seq=1, time=0ms
64 bytes from ::10.10.132.20: icmp_seq=2, time=0ms
64 bytes from ::10.10.132.20: icmp_seq=3, time=0ms
64 bytes from ::10.10.132.20: icmp_seq=4, time=0ms
.
Diagnostics
280 Publication date: March, 2012
Revision A1