3-10.2 Ports - Manufacture Technology GEFXL2-CSW28KX User Manual

3-10.2 Ports

The function in VLAN Tag Rule Setting, user can input VID number to each port. The range
of VID number is from 1 to 4094. User also can choose ingress filtering rules to each port.
There are two ingress filtering rules which can be applied to the switch. The Ingress Filtering
Rule 1 is "forward only packets with VID matching this port's configured VID". The Ingress
Filtering Rule 2 is "drop untagged frame". You can also select the Role of each port as
Access, Trunk, or Hybrid.
Web Interface
To configure VLAN Port configuration in the web interface:
1. Click VLAN Port Configuration.
2. Specify the VLAN Port Configuration parameters.
3. Click Save.
Figure 3-10.2: The VLAN Port Configuration
Parameter description:
Ethertype for Custom S-ports :

This field specifies the ether type used for Custom S-ports. This is a global setting for all
the Custom S-ports. Custom Ethertype enables the user to change the Ethertype value on
a port to any value to support network devices that do not use the standard 0x8100
Ethertype field value on 802.1Q-tagged or 802.1p-tagged frames.
Port :

This is the logical port number of this row.
Port Type :

Port can be one of the following types: Unaware, Customer port(C-port), Service port(S-
port), Custom Service port(S-custom-port)
If Port Type is Unaware, all frames are classified to the Port VLAN ID and tags are not
removed.
Ingress Filtering :

138 Publication date: March, 2012
Revision A1