Manufacture Technology GEFXL2-CSW28KX User Manual page 158

Parameter description:
Delete :

To delete a MAC-based VLAN entry, check this box and press save. The entry will be
deleted on the selected switch in the stack.
MAC Address :

Indicates the MAC address.
VLAN ID :

Indicates the VLAN ID.
Port Members :

A row of check boxes for each port is displayed for each MAC-based VLAN entry. To
include a port in a MAC-based VLAN, check the box. To remove or exclude the port from
the MAC-based VLAN, make sure the box is unchecked. By default, no ports are members,
and all boxes are unchecked.
Adding a New MAC-based VLAN

Click to add a new MAC-based VLAN entry. An empty row is added to the table, and the
MAC-based VLAN entry can be configured as needed. Any unicast MAC address can be
configured for the MAC-based VLAN entry. No broadcast or multicast MAC addresses are
allowed. Legal values for a VLAN ID are 1 through 4095.
The MAC-based VLAN entry is enabled on the selected stack switch unit when you click on
"Save". A MAC-based VLAN without any port members on any stack unit will be deleted
when you click "Save".
The button can be used to undo the addition of new MAC-based VLANs.
Buttons:

Save – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
148 Publication date: March, 2012
Revision A1