3-5.2 Port Configuration - Manufacture Technology GEFXL2-CSW28KX User Manual

3-5.2 Port Configuration

The chapter describes MRSTP port configuration after you configure the MRSTP instance
then you can assign the port to join what instance and set the parameters for MRSTP
implementation.
Web Interface
To configure the MRSTP Port configuration in the web interface:
1. Click Configuration, MRSTP, Port Configuration
2. Scroll to select what instance you want to assign to the Port.
3. Scroll to select includes Path Cost, Priority, Admin Edge and Admin P2P parameters.
4. Click the save to save the setting
6. If you want to cancel the setting then you need to click the Reset button.
It will revert to previously saved values
Figure 3-5.2: The MRSTP Port Configuration.
81 Publication date: Oct., 2011
Revision A1