S-Flow Agent; 3-18.1 Collector - Manufacture Technology GEFXL2-CSW28KX User Manual

3-18 s-Flow Agent

The sFlow Collector configuration for the switch can be monitored and modified here. Up to 1
Collector is supported. This page allows for configuring sFlow collector IP type, sFlow
collector IP Address,Port Number, for each sFlow Collector

3-18.1 Collector

The "Current " field displays the currently configured sFlow Collector. The "Configured" field
displays the new Collector Configuration.
Web Interface
To configure the sFlow Agent in the web interface:
1. Click Configuration, sFlow Agent, Collector
2. Set the parameters
3. Scroll to IP Type to choice with IPv4 or IPv6
4. Click the save to save the setting
5. If you want to cancel the setting then you need to click the Reset button.
It will revert to previously saved values
.
Figure 3-18.1: The sFlow Collector Configuration
Parameter description:
Receiver Id :

The "Receiver ID" input fields allow the user to select the receiver ID. Indicates the ID of
this particular sFlow Receiver. Currently one ID is supported as one collector is supported.
IP Type :

A drop down list to select the type of IP of Collector is displayed. By default, IPv4 is the
type of Collector IP type. You could using IPv4 or IPv6.
IP Address :

The address of a reachable IP is to be entered into the text box.
This IP is used to monitor the sFlow samples sent by sFlow Agent(our switch).
By default, The IP is set to 0.0.0.0,and a new entry has to be added to it.
Port :

A port to listen to the sFlow Agent has to be configured for the Collector.
193
Publication date: March, 2012
Revision A1