3-10.5 Private Vlans; 3-10.5.1 Private Vlans Membership - Manufacture Technology GEFXL2-CSW28KX User Manual

3-10.5 Private VLANs

In a private VLAN, communication between ports in that private VLAN is not permitted. A
VLAN can be configured as a private VLAN.

3-10.5.1 Private VLANs Membership

The Private VLAN membership configurations for the switch can be monitored and modified
here. Private VLANs can be added or deleted here. Port members of each Private VLAN can
be added or removed here. Private VLANs are based on the source port mask, and there are
no connections to VLANs. This means that VLAN IDs and Private VLAN IDs can be identical.
A port must be a member of both a VLAN and a Private VLAN to be able to forward packets.
By default, all ports are VLAN unaware and members of VLAN 1 and Private VLAN 1. A VLAN
unaware port can only be a member of one VLAN, but it can be a member of multiple Private
VLANs.
Web Interface
To configure Private VLAN configuration in the web interface:
1. Click add new Private VLAN configuration
2. Specify the Private VLAN ID and Port Members
3. Click Save.
Figure 3-10.5.1: The Private VLAN Membership Configuration
Parameter description:
Delete :

To delete a private VLAN entry, check this box. The entry will be deleted during the next
save.
Private VLAN ID :

Indicates the ID of this particular private VLAN.
Port Members :

A row of check boxes for each port is displayed for each private VLAN ID. To include a port
in a Private VLAN, check the box. To remove or exclude the port from the Private VLAN,
make sure the box is unchecked. By default, no ports are members, and all boxes are
unchecked.
Adding a New Private VLAN :

Click to add a new private VLAN ID. An empty row is added to the table, and the private
VLAN can be configured as needed.
Buttons:

Save – Click to save changes.
144 Publication date: March, 2012
Revision A1