3-6.3 Port Group Filtering - Manufacture Technology GEFXL2-CSW28KX User Manual

3-6.3 Port Group Filtering

The section describes that you could to set the Port Group Filtering in the MLD Snooping
function. On the UI that you could add new filtering group and safety policy.
Web Interface
To configure the MLD Snooping Port Group Configuration in the web interface:
1. Click Configuration, MLD Snooping, Port Group Filtering Configuration
2. Click the Add new Filtering Group
3. Specify the Filtering Groups with entries per page.
4. Click the save to save the setting
5. If you want to cancel the setting then you need to click the Reset button.
It will revert to previously saved values
Figure 3-7.3: The MLD Snooping Port Group Filtering Configuration
Parameter description:
Delete :

Check to delete the entry. It will be deleted during the next save.
Port :

The logical port for the settings. You can evoke to enable the port to join filtering Group
Filtering Groups

The IP Multicast Group that will be filtered.
Buttons:

Save – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
102 Publication date: March, 2012
Revision A1