3-6.5 Group Infermation - Manufacture Technology GEFXL2-CSW28KX User Manual

3-6.5 Group Infermation

The section describes user could set the MLD Snooping Groups Information. The "Start from
VLAN", and "group" input fields allow the user to select the starting point in the MLD Group
Table
Each page shows up to 99 entries from the MLD Group table, default being 20, selected
through the "entries per page" input field. When first visited, the web page will show the first
20 entries from the beginning of the MLD Group Table.
Web Interface
To display the MLD Snooping Group information in the web interface:
1. Click Configuration, MLD Snooping, Group Information
2. If you want to auto-refresh the information then you need to evoke the
"Auto-refresh"
3. Click " Refresh" to refresh a entry of the MLD Snooping Group
Information.
4. Click " Clear" to clear the MLD Snooping Groups information..
Figure 3-6.5: The MLD Snooping Groups Information
Parameter description:
Navigating the MLD Group Table
Each page shows up to 99 entries from the MLD Group table, default being 20, selected
through the "entries per page" input field. When first visited, the web page will show the
first 20 entries from the beginning of the MLD Group Table.The "Start from VLAN", and
"group" input fields allow the user to select the starting point in the MLD Group Table.
Clicking the button will update the displayed table starting from that or the next closest.
MLD Group Table match. In addition, the two input fields will - upon a button click -
assume the value of the first displayed entry, allowing for continuous refresh with the same
start address.The will use the last entry of the currently displayed as a basis for the next
lookup. When the end is reached the text "No more entries" is shown in the displayed table.
Use the button to start over.
MLD Snooping Information Table Columns
VLAN ID :

VLAN ID of the group.
Groups :

Group address of the group displayed.
Port Members :

Ports under this group.
105
Publication date: March, 2012
Revision A1