3-16.7 Dscp-Based Qos - Manufacture Technology GEFXL2-CSW28KX User Manual

3-16.7 DSCP-Based QoS

The section will teach user to configure the DSCP-Based QoS mode that This page
allows you to configure the basic QoS DSCP based QoS Ingress Classification settings
for all switches.
Web Interface
To configure the DSCP –Based QoS Ingress Classification parameters in the web
interface:
1. Click Configuration, QoS, DSCP-Based QoS
2. Evoke to enable or disable the DSCP for Trust
3. Scroll to select QoS Class and DPL parameters
4. Click the save to save the setting
5. If you want to cancel the setting then you need to click the Reset
button. It will revert to previously saved values
Figure 3-16.7: The DSCP-Based QoS Ingress Classification Configuration
180 Publication date: March, 2012
Revision A1