Manufacture Technology GEFXL2-CSW28KX User Manual page 60

Select the policy to apply to this port. The allowed values are 1 through 8. The
default value is 1.
Action :

Select whether forwarding is permitted ("Permit") or denied ("Deny"). The
default value is "Permit".
Rate Limiter ID :

Select which rate limiter to apply on this port. The allowed values are Disabled
or the values 1 through 16. The default value is "Disabled".
Port Copy :

Select which port frames are copied on. The allowed values are Disabled or a
specific port number. The default value is "Disabled".
Mirror :

Specify the mirror operation of this port. The allowed values are:
Enabled: Frames received on the port are mirrored.
Disabled: Frames received on the port are not mirrored.
The default value is "Disabled".
Logging :

Specify the logging operation of this port. The allowed values are:
Enabled: Frames received on the port are stored in the System Log.
Disabled: Frames received on the port are not logged.
The default value is "Disabled". Please note that the System Log memory size
and logging rate is limited.
Shutdown :

Specify the port shut down operation of this port. The allowed values are:
Enabled: If a frame is received on the port, the port will be disabled.
Disabled: Port shut down is disabled.
The default value is "Disabled".
Counter :

Counts the number of frames that match this ACE.
Buttons

Save – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
Upper right icon (Refresh, clear)

You can click them for refresh the ACL Port Configuration or clear them by
manual.
50 Publication date: March, 2012
Revision A1