Port Security; 4-7.1 Limit Control - Manufacture Technology GEFXL2-CSW28KX User Manual

4-7 Port Security

This section shows you to to configure the Port Security settings of the Switch. You can use
the Port Security feature to restrict input to an interface by limiting and identifying MAC
addresses.

4-7.1 Limit Control

This section shows you to to configure the Port Security settings of the Switch. You can use
the Port Security feature to restrict input to an interface by limiting and identifying MAC
addresses.
Web Interface
To configure a System Configuration of Limit Control in the web interface:
1. Select "Enabled" in the Mode of
2. Checked Aging Enabled.
3. Set Aging Period (Default is 3600 seconds).
To configure a Port Configuration of Limit Control in the web interface:
1. Select "Enabled" in the Mode of
2. Specify the maximum number of MAC addresses in the Limit of
Configuration.
3. Set Ation (Trap, Shutdown, Trap & Shutdown)
4. Click Save.
Figure 4-7.1: The Port Security Limit Control Configuration
Parameter description:
System Configuration
Mode :

Indicates if Limit Control is globally enabled or disabled on the switchstack. If globally
disabled, other modules may still use the underlying functionality, but limit checks and
Configuration.
System
Configuration.
Port
260
Port
Publication date: March, 2012
Revision A1