Virtual Ethernet Interface Configuration Command - NEC SOPHO IP 5000 Command Reference Manual

4.18

Virtual Ethernet Interface Configuration Command

display interface
virtual-ethernet
interface virtual-ethernet Syntax
mac-address
Command Reference Guide
Syntax
display interface virtual-ethernet [ number ]
View
Any view
Parameter
number: Number of virtual Ethernet interfaces, with sequence number ranging
from 0 to 1023. If the number of interfaces is not specified, the status of all
virtual Ethernet interfaces will be displayed.
Description
Using the display interface virtual-ethernet command, you can view status of
a virtual Ethernet interface.
Example
View the status information of virtual Ethernet interface 1/0/0.
<NEC-PHILIPS> display interface virtual-ethernet 1/0/0
interface virtual-ethernet number
undo interface virtual-ethernet number
View
System view
Parameter
number: Number of virtual Ethernet interface, with sequence number ranging
from 0 to 1023.
Description
Using the interface virtual-ethernet command, you can create a virtual
Ethernet interface. Using the undo interface virtual-ethernet command, you
can delete the specified virtual Ethernet interface.
Virtual Ethernet interface is mainly applied to PPPoEoA and IPoEoA.
Example
Create virtual Ethernet interface 12 on interface card 0 of slot 6.
[NEC-PHILIPS] interface virtual-ethernet 6/0/12
[NEC-PHILIPS-Virtual-Ethernet6/0/12]
Syntax
mac-address H-H-H
undo mac-address
View
Virtual Ethernet interface view
Parameter
H-H-H: Mac address of virtual Ethernet interface, in the form of hex character
string.
SOPHO
IP 5000/SOPHO IP6000
188