NEC SOPHO IP 5000 Command Reference Manual page 103

snmp-agent sys-info
snmp-agent target-host
Command Reference Guide
Syntax
snmp-agent sys-info { contact sysContact | location sysLocation | version
{ { v1 | v2c | v3} * | all } }
undo snmp-agent sys-info { contact | location | version { { v1 | v2c | v3 } * |
all } }
View
System view
Parameter
contact: Sets the system maintenance contact information.
sysContact: Character sting describing the system maintenance contact
information.
location: Sets the physical location of the device.
sysLocation: Device location information.
version: Sets the SNMP version number used by the system.
v1: SNMP V1.
v2c: SNMP V2C.
v3: SNMP V3.
*: Indicates selecting one to three items from the three options of v1, v2c and
v3.
all: SNMP V1, SNMP V2C and SNMP V3.
Description
Using the snmp-agent sys-info command, you can set the system information,
including the system maintenance information, physical location information of
the device and the SNMP version number used. Using the undo snmp-agent
sys-info command, you can remove the current setting.
By default,
By default, the system contact information is "R&D Beijing,NEC-PHILIPS
Technologies Co.,Ltd.", the system location character string is "Beijing China"
and the version is SNMPv3
For the related command, see display snmp-agent sys-info.
Example
Set the system maintenance information as call Operator at 010-82882488.
[NEC-PHILIPS] snmp-agent sys-info contact call Operator at 010-82882488
Syntax
snmp-agent target-host trap address udp-domain X.X.X.X [ udp-port port-
number ] params securityname security-string [ v1 | v2c | v3 {
authentication | privacy } ]
undo snmp-agent target-host X.X.X.X securityname security-string
SOPHO
IP 5000/SOPHO IP6000
103