NEC SOPHO IP 5000 Command Reference Manual page 176

Command Reference Guide
Target Margin: 3 dB
LOC Detect: 0
Losw Defect: 0
Frm Sync: 1
Tx Cells: 0
Rx Cells: 0
Drop Cells: 0
HecErr Cells: 0
CRCS: 135
SEGAS: 335
LOSWS: 4
Int Count
TX EOC: 0
RX EOC: 4
RX LOSD: 0
RX SEGA: 0
RX PS: 0
RX SEGD: 0
RX LOSWS: 1
Actual Rate(kbps): 2064
Actual Annex: B
Actual SNR (dB): 38
Actual LoopAttn(dB): 0.9
Actual RecvGain(dB): 11.4
Actual TxPower(dBm): 14.5
Actual Wire Type: 2
FrmOH Stat:
Rmt Encoder A : 0x6e010000
Rmt Encoder B : 0x31030000
Rmt NSF Cusdata :
Rmt NSF CusID :
Rmt Country Code :
Rmt Provider Code:
NPSG
Rmt Vendor Data:
0x00 0x00 0x00 0x00
Table 6 Displaying information of display dsl status
Field
Operating Mode
Wire Type
Phy Op State
Xcvr Op State
Actual LoopAttn(dB)
Actual RecvGain(dB)
Actual TxPower(dBm)
FrmOH Stat
Rmt NSF Cusdata
Rmt NSF CusID
0x0f
0x0000
0x0000
0x00b5
0x4753504e
0x00 0x00 0x00 0x00
Description
CPE stands for customer premises equipment and
CO for central office.
The options include 2-line type and 4-line type.
Currently only 2-line type is available.
Interface state and the options include activating,
active, startup, deactivated and test mode.
Transceiver state and the options include idle, data
mode, handshaking and training.
Actual loop attenuation
Actual receive gain
Actrual transmit gain
FirmWare Over Head state
User data
User ID
SOPHO
IP 5000/SOPHO IP6000
176