NEC SOPHO IP 5000 Command Reference Manual page 70

authentication-mode
auto-execute command
Command Reference Guide
Example
Remove the restriction on Telnet outgoing calls.
[NEC-PHILIPS-ui-vty0] undo acl outbound
Syntax
authentication-mode { local | password | scheme { list | default } }
authentication-mode none
View
User interface view
Parameter
local: Performs local database authentication.
password: Performs local password authentication.
scheme: Performs AAA authorization authentication.
default: Uses the default authentication parameter.
list: Uses the authentication list.
none: Performs no authentication.
Description
Using the authentication-mode command, you can set the mode that a user
interface uses to authenticate the login users. Using the authentication-mode
none command, you can set the authentication mode to none, that is, the login
users need not undergo authentication before they access the user interface.
By default, the authentication mode is set to password for the VTY user
interface and none for other user interfaces.
For related command, see set authentication password.
Example
Enable local password authentication.
[NEC-PHILIPS-ui0] authentication-mode password
Syntax
auto-execute command command
undo auto-execute command
View
User interface view
Parameter command:
Command to be automatically executed.
Description
Using the auto-execute command command, you can set a command to be
automatically executed. Using the undo auto-execute command command,
you can disable the automatic execution of the command.
By default, command auto-execution is disabled.
You should be aware of the following constraints before using the auto-execute
SOPHO
IP 5000/SOPHO IP6000
70