NEC SOPHO IP 5000 Command Reference Manual page 43

upgrade
undo schedule reboot
Command Reference Guide
configuration be valid. If there is related configuration before, it will be covered
directly.
Moreover, after the schedule reboot at command is configured, and the
system time is adjusted by the clock command, the original schedule reboot at
parameter will become invalid.
For the related command, see reboot, schedule reboot at, undo schedule
reboot, display schedule reboot.
Example
Configure the router to be restarted after 88 minutes (the current time is 21:32).
<NEC-PHILIPS> schedule reboot delay 88
Reboot scheduled for 23:00:00 UTC 2002/11/1 (in 1 hours and 28 minutes)
Proceed with reboot? [Y/N]:y
Syntax
upgrade [ bootrom | pico-code] filename
View
System view
Parameter
bootrom: Upgrades the BootROM on line .
pico-code: Upgrades the pico-code on line.
filename: The file name of the upgrade software package to be used.
Description
Using the upgrade command, you can upgrade the BootRom program, pico-
code or the logic.
Example
Upgrade the pico-code on line, given the file name of the upgrade software
package is filename.
[NEC-PHILIPS] upgrade pico-code filename
Syntax
undo schedule reboot
View
User view
Parameter
None
Description
Using the undo schedule reboot command, you can cancel the parameter
configuration of the schedule reboot terminal service.
For the related command, see reboot, schedule reboot at, schedule reboot
delay, display schedule reboot.
Example
Cancel the timing reboot router function.
<NEC-PHILIPS> undo schedule reboot
SOPHO
IP 5000/SOPHO IP6000
43