NEC SOPHO IP 5000 Command Reference Manual page 99

snmp-agent
snmp-agent community
Command Reference Guide
Table 7 Description of display snmp-agent usm-user fields
Content
authuser
User name
Engine ID
Active
Syntax
snmp-agent
undo snmp-agent
View
System view
Parameter
None
Description
Using the snmp-agent command, you can enable the SNMP Agent and specify
the SNMP configuration information. Using the undo snmp-agent command,
you can disable SNMP Agent.
By default, the SNMP Agent is disabled.
The snmp-agent command can be used to enable SNMP Agent, and any
configuration command of snmp-agent can also enable SNMP Agent. However,
the undo form of the corresponding command does not have the functions. It
will be invalid configuring the undo form of the command when the SNMP Agent
is not enabled.
The undo snmp-agent command is used to disable the SNMP Agent on the
condition that SNMP Agent has been enabled.
Example
Disable the operating SNMP version.
[NEC-PHILIPS] undo snmp-agent
SNMP Agent disabled
Syntax
snmp-agent community { read | write } community-name [ [ mib-view view-
name ] | [ acl acl-number ] ]*
undo snmp-agent community community-name
View
System view
Parameter
read: Indicates that the community name has the read-only authority in the
specified view.
write: Indicates that the community name has the read and write authority in the
specified view.
community-name: Character string of community name.
SOPHO
IP 5000/SOPHO IP6000
Description
Modify display information
Character string used to identify the
SNMP user
Character string used to identify the
SNMP device
Indicate the state of SNMP USER
99