NEC SOPHO IP 5000 Command Reference Manual page 37

terminal trapping
Command Reference Guide
Using the terminal monitor command, you can enable terminals to display the
debugging /logging/trapping information sent by the info-center. Using the undo
terminal monitor command, you can disable terminals to display the
debugging/logging/trapping information.
By default, the display function of console users is enabled but the display
function of terminal users is disabled.
The command only affects the current terminal that inputs it. The undo terminal
monitor command is equivalent to the execution of undo terminal debugging,
undo terminal logging, and undo terminal trapping commands, that is, all
the debugging/logging/trapping information will not be displayed at the current
terminal. In the event that terminal monitor has been enabled, the terminal
debugging/undo terminal debugging, terminal logging/undo terminal
logging, and terminal trapping/undo terminal trapping commands can be
used to enable/disable the debugging/logging/trapping information.
Example
Disable terminal monitor.
<NEC-PHILIPS> undo terminal monitor
Syntax
terminal trapping
undo terminal trapping
View
User view
Parameter
None
Description
Using the terminal trapping command, you can enable the function of trap
information display at terminals. Using the undo terminal trapping command,
you can disable the function of trap information display at terminals.
By default, the system configuration is to enable the display function.
Example
Disable the trapping information display function.
<NEC-PHILIPS> terminal trapping
SOPHO
IP 5000/SOPHO IP6000
37