NEC SOPHO IP 5000 Command Reference Manual page 83

display ntp-service
sessions
display ntp-service status Syntax
Command Reference Guide
selection: NTP clock selection information debugging.
synchronization: NTP clock synchronous information debugging.
validity: Validity debugging of NTP remote host.
Description
Using the debugging ntp-service command, you can enable debugging of all
types of NTP service information. Using the undo debugging ntp-service
command, you can disable NTP service debugging.
By default, all the information debugging is disabled.
Example
Enable the ntp access control debugging.
<NEC-PHILIPS> debugging ntp-service access
Syntax
display ntp-service sessions [ verbose ]
View
Any view
Parameter
verbose: Displays the detailed information of sessions.
Description
Using the display ntp-service sessions command, you can display the status
of all the sessions maintained by the local device ntp.
By default, the status of all the sessions maintained by the local device NTP is
displayed.
The command without parameter verbose will display the brief information of all
the sessions maintained by the local device NTP.
The command with parameter verbose will display the detailed information of all
the sessions maintained by the local device NTP.
Example
Display the brief information of all the sessions maintained by the local device
NTP
<NEC-PHILIPS> display ntp-service sessions
sourcerefidstnowpollreachdelayoffsetdis
******************************************************************
[12345]1.0.1.11LOCAL(0)316437726.1199.539.7
note: 1 source(master),2 source(peer),3 selected,4 candidate,5 configured
display ntp-service status
View
Any view
SOPHO
IP 5000/SOPHO IP6000
83