NEC SOPHO IP 5000 Command Reference Manual page 100

snmp-agent group
Command Reference Guide
mib-view: MIB view available for the specified community name
view-name: Name of MIB view.
acl: Sets the ACL corresponding to the community name.
acl-number: Number of the ACL, range 1 to 99.
Description
Using the snmp-agent community command, you can set the community
access name of SNMPV1 and SNMPV2C and MIB views and ACLs available
for the community name. Using the undo snmp-agent community command,
you can remove the setting.
For the related command, see snmp-agent group, snmp-agent usm-user.
Example
Set the community name to comaccess and allow read-only access with this
community name.
[NEC-PHILIPS] snmp-agent community read comaccess
Set the community name to mgr and enable reading and writing access.
[NEC-PHILIPS] snmp-agent community write mgr
Delete the community name comaccess.
[NEC-PHILIPS] undo snmp-agent community comaccess
Syntax
snmp-agent group { v1 | v2c } group-name { [ read read-view ] | [ write
write-view ] | [ notify notify-view ] } [ acl acl-number ]
undo snmp-agent group { v1 | v2c } group-name
snmp-agent group v3 group-name [ authentication | privacy ] { [ read read-
view ] | [ write write-view ] | [ notify notify-view ] } [ acl acl-number ]
undo snmp-agent group v3 group-name [ authentication | privacy ]
View
System view
Parameter
v1: V1 security mode the user uses.
v2c: V2C security mode the user uses.
v3: V3 security mode the user uses.
group-name: Group name, in the range of 1 to 32 bytes.
authentication: Performs authentication of the packet without encryption.
privacy: Performs authentication and encryption of the packet.
read: Enables the setting of read-only view.
read-view: Name of the read-only view, in the range of 1 to 32 bytes.
SOPHO
IP 5000/SOPHO IP6000
100