NEC SOPHO IP 5000 Command Reference Manual page 12

language-mode
Command Reference Guide
CTRL_O undo debug all
CTRL_T display tcp status
=Undefined hotkeys=
Hotkeys Command
CTRL_U NULL
=System hotkeys=
Hotkeys Function
CTRL_A Move the cursor to the beginning of the current line.
CTRL_B Move the cursor one character left.
CTRL_C Stop current command function.
CTRL_D Erase current character.
CTRL_E Move the cursor to the end of the current line.
CTRL_F Move the cursor one character right.
CTRL_H Erase the character left of the cursor.
CTRL_K Kill outgoing connection.
CTRL_N Display the next command from the history buffer.
CTRL_P Display the previous command from the history buffer.
CTRL_R Redisplay the current line.
CTRL_V Paste text from the clipboard.
CTRL_W Delete the word left of the cursor.
CTRL_X Delete all characters up to the cursor.
CTRL_Y Delete all characters after the cursor.
CTRL_Z Return to the user view.
CTRL_] Kill incoming connection or redirect connection.
ESC_B Move the cursor one word back.
ESC_D Delete remainder of word.
ESC_F Move the cursor forward one word.
ESC_N Move the cursor down a line.
ESC_P Move the cursor up a line.
ESC_< Specify the beginning of clipboard.
ESC_> Specify the end of clipboard.
Syntax
language-mode { chinese | english }
View
User view
Parameter
None
Description
Using the language-mode command, you can switch between different
language modes of command line interface.
By default, the language mode is English.
The command line interface of the system also supports Chinese mode to fit
into domestic users in China.
Example
Switch from English mode to Chinese mode.
<NEC-PHILIPS> language-mode Chinese
Change language mode, confirm? [Y/N]y
% Switch to Chinese mode.
SOPHO
IP 5000/SOPHO IP6000
12