Information Processing Commands - NEC SOPHO IP 5000 Command Reference Manual

3.2

Information Processing Commands

display channel
display info-center
Command Reference Guide
Syntax
display channel [ channel-number | channel-name ]
View
Any view.
Parameter
channel-number: Channel number, ranging 0 to 9. That is, the system has 10
channels.
channel-name: Channel name.
Table 1 Channel names and their associated channel numbers
Channel name
channel6
channel7
channel8
channel9
console
logbuffer
loghost
monitor
snmpagent
trapbuffer
Description
Using the display channel command, you can display the contents of an
information channel.
This command displays the setting states of all channels when executed without
any parameter.
Example
Display the contents of information channel 0.
<NEC-PHILIPS> display channel 0
channel number:0, channel name:console
MODU_ID NAME ENABLE LOG LEVEL ENABLE TRAP LEVEL ENABLE
DEBUG LEVEL
ffff0000 all Y warning Y debugging Y debugging
Syntax
display info-center
View
Any view
Parameter
None
Description
Using the display info-center command, you can display all the
information recorded in the info-center.
SOPHO
Information channel number
6
7
8
9
0
4
2
1
5
3
IP 5000/SOPHO IP6000
24