NEC SOPHO IP 5000 Command Reference Manual page 78

send
set authentication
password
Command Reference Guide
By default, the number of rows in one screen is 24.
screen-length 0 indicates to disable the split screen function.
Example
Set the number of rows in one screen of the terminal to 30. [
NEC-PHILIPS-ui-console0] screen-length 30
Syntax
send [ number | all | type-name number ]
View
User view
Parameter
all: Sends messages to all user interfaces.
type-name: Name of user interface type.
number: Absolute/Relative user interface number.
Description
Using the send command, you can transfer messages between user interfaces.
Using the send all command, you can send messages to all user-interfaces.
Using the send number command, you can send messages to the user
interface defined by specifying its number.
Using the send type-name number command, you can send messages to the
user interface of type-name with specified number.
Example
Send messages to the console user-interface.
<NEC-PHILIPS> send con 0
Enter message, end with CTRL+Z or Enter; abort with CTRL+C:
Hello,good morning!
Send message? [Y/N]
Syntax
set authentication password { simple | cipher } password
undo set authentication password
View
User interface view
Parameter
simple: Plain text password.
cipher: Encrypted password.
password: If password form is set to simple, the parameter password must be
in plain text. If the password form is set to cipher, the password can be either in
encrypted text or in plain text depending on what has been input. A plain-text
password can be a string of no more than 16 consecutive characters, 1234567
SOPHO
IP 5000/SOPHO IP6000
78