NEC SOPHO IP 5000 Command Reference Manual page 74

free user-interface
history-command
max-size
idle-timeout
Command Reference Guide
Example
Configure software flow control in user interface view.
[NEC-PHILIPS-ui-console0] flow-control software
Syntax
free user-interface [type-name] number
View
User view
Parameter
type-name: User interface type.
number: Absolute/Relative user interface number.
Description
Using the free user-interface number command, you can clear the user
interface with the number defined by the parameter number. Using the free
user-interface type-name number command, you can clear the user interface
with the number defined by number in the user interfaces of the type defined by
type-name.
Example
Clear user-interface 0.
<NEC-PHILIPS> free user-interface 0
Syntax
history-command max-size size-value
undo history-command max-size
View
User interface view
Parameter
size-value: History buffer size, which is in the range of 0 to 256 and defaults to
10, that is, up to ten history commands can be stored.
Description
Using the history-command max-size command, you can set the history
command buffer size. Using the undo history-command max-size command,
you can restore the default history command buffer size.
Example
Set size of the history command buffer to 20.
[NEC-PHILIPS-ui-console0] history-command max-size 20
Syntax
idle-timeout minutes [ seconds ]
undo idle-timeout
View
User interface view
Parameter
minutes: Number of minutes, in the range of 0 to 35791. seconds: Number of
seconds, in the range of 0 to 59.
SOPHO
IP 5000/SOPHO IP6000
74