NEC SOPHO IP 5000 Command Reference Manual page 106

snmp-agent trap life
snmp-agent
trap queue-size
snmp-agent trap source
Command Reference Guide
Syntax
snmp-agent trap life seconds
undo snmp-agent trap life
View
System view
Parameter
seconds: Timeout in seconds, ranging 1 to 2592000 with the default value as
120 seconds.
Description
Using the snmp-agent trap life command, you can set the conservation time of
the Trap packet and the Trap packets exceeding the time will be dropped. Using
the undo snmp-agent trap life command, you can remove the current setting.
If the conservation time for the Trap packets the system has configured is
seconds. The Trap packets over the conservation time will be discarded without
being sent or conserved.
For the related command, see snmp-agent trap enable, snmp-agent target-
host.
Example
Set the timeout of the Trap packet to 60 seconds.
[NEC-PHILIPS] snmp-agent trap-life 60
Syntax
snmp-agent trap queue-size size
undo snmp-agent trap queue-size
View
System view
Parameter:
Size: Length of the message queue, ranging 1 to 1000.
Description
Using the snmp-agent trap queue-size command, you can set the length of
the message queue of the Trap packet sent to the destination host. Using the
undo snmp-agent trap queue-size command, you can cancel the setting.
By default, the length is 100.
For the related command, see snmp-agent trap enable, snmp-agent
target-host, snmp-agent trap life.
Example
Set the length of the message queue of the host forwarding the Trap packet to
200.
[NEC-PHILIPS] snmp-agent trap queue-size 200
Syntax
snmp-agent trap source interface-type interface-number [ subinterface-
type ]
undo snmp-agent trap source
View
System view
SOPHO
IP 5000/SOPHO IP6000
106