NEC SOPHO IP 5000 Command Reference Manual page 22

reboot
tracert
Command Reference Guide
Syntax
reboot
View
User view
Parameter
None
Description
Using the reboot command, you can reboot the device.
This command produces the same effect as the power being turned off and
then on, but provides the user with a convenient method of rebooting the device
from a remote site.
The operation of this command will render the network unusable for a short
period of time. So it should be used with caution. Before rebooting the Router,
remember to save the configuration file if necessary,.
Example
Reboot the device.
<NEC-PHILIPS> reboot
System will reboot! Continue?[Y/N]
Syntax
tracert [ -a X.X.X.X | -f first_TTL | -m max_TTL | -p port | -q nqueries | vpn-
instance vpn-instance-name | -w timeout ] * host
View
Any view
Parameter
-a: Specifies source IP address of the tracert packets, which is in the format of
X.X.X.X and must be the address of a local interface.
-f: Tests the correctness of the –f switch with first_TTL specifying an initial TTL
in the range of 0 to the maximum TTL.
-m: Tests the correctness of the –m switch with max_TTL specifying a
maximum TTL which can be any TTL larger than the initial TTL.
-p: Tests the correctness of the –p switch with port being an integer specifying
the port of the destination host. There is no need to change this option in normal
circumstances.
-q: Tests the correctness of the –q switch with nqueries specifying the number
of the query packets sent each time. It can be any integer larger than 0.
vpn-instance vpn-instance-name: Sets the vpn-instance name of MPLS VPN
to specify the VPN attribute configured in this tracert command, that is, name of
the associated vpn-instance created at the local.
-w timeout: Tests the correctness of the –w switch with timeout specifying the
timeout time of IP packets. It is in seconds and can be any integer larger than 0.
host: IP address of the destination host.
Description
Using the tracert command, you can test the gateways that a packet sent by
the host will pass by in order to reach the destination for the purpose of testing
SOPHO
IP 5000/SOPHO IP6000
22