File Management Commands - NEC SOPHO IP 5000 Command Reference Manual

3.4

File Management Commands

File System Commands
clear
copy
Command Reference Guide
Syntax
cd directory
View
User view
Parameter
directory: Name of destination directory.
Description
Using the cd command, you can modify the current operating path of the router
to the specified directory.
By default, the flash memory is the operating path set when the router starts.
Example
Modify the current operating path of the router to test.
<NEC-PHILIPS> cd test
<NEC-PHILIPS> pwd flash:/test
Syntax
clear filename
View
User view
Parameter
filename: Name of file to be deleted.
Description
Using the clear command, you can delete all files from the recycle bin.
The wildcard "*" is available here. Using the delete command, you can only
move the target files into the recycle bin. If you want to remove them from the
recycle bin, you must use the clear command.
Example
Clear the recycle bin.
<NEC-PHILIPS> clear flash:/p1h_logic.out
clear flash:/plh_logic.out?[Y/N]
Syntax
copy filename_source filename_dest
View
User view
Parameter
filename_source: Name of the source file.
filename_dest: Name of the destination file or directory.
Description
Using the copy command, you can copy a file.
SOPHO
IP 5000/SOPHO IP6000
44