NEC SOPHO IP 5000 Command Reference Manual page 84

display ntp-service trace Syntax
Command Reference Guide
Parameter
None
Description
Using the display ntp-service status command, you can display the
state information of the NTP service.
Example
<NEC-PHILIPS> display ntp-service status
clock status: unsynchronized
clock stratum: 16
reference clock ID: none
nominal frequency: 100.0000 Hz
actual frequency: 100.0000 Hz
clock precision: 2^18
clock offset: 0.0000 ms
root delay: 0.00 ms
root dispersion: 0.00 ms
peer dispersion: 0.00 ms
reference time: 00:00:00.000 UTC Jan 1 1900(00000000.00000000)
Description of the display information is shown in the following table.
Table 3 Stating information of the NTP service
Display
Description
information
synchronized Indicate that the local system is synchronized to a
remote NTP server or a clock source
unsynchronized Indicate that the local system is not synchronized to any
remote NTP server
stratum The NTP stratum of the local system
reference If the local system has been synchronized to a remote
NTP server or a clock source, it indicates the address
of the remote server or clock source ID
nominal freq Nominal frequency of the hardware clock of the local
system
actual freq Actual frequency of the hardware clock of the local
system
precision Precision of the local system clock
reftime Reference timestamp
offset Offset of the NTP server relative to the local clock
root delay Overall delay from the local to the master reference
clock
root disper Dispersion of the local master reference clock
peer disper Dispersion of the remote NTP server
display ntp-service trace [ X.X.X.X ]
View
Any view
Parameter
X.X.X.X: The IP address of the NTP server functioning as the reference clock
source.
Description
Using the display ntp-service trace command, you can display the summary
SOPHO
IP 5000/SOPHO IP6000
84