NEC SOPHO IP 5000 Command Reference Manual page 16

sysname
system-view
Command Reference Guide
Description
Using the super password command, you can set the password need to switch
from a lower-level user to a higher-level user. Using the undo super password
command, you can remove the current setting.
By default, simple text password is adopted.
Example
Execute the following command in system view:
[NEC-PHILIPS] super password level 3 simple zbr
Syntax
ysname sysname
View
System view
Parameter
sysname: Name of the router. It is a character string containing 1 to 30
characters.
Description
Using the sysname command, you can set the name of a router.
By default, a router is named "NEC-PHILIPS".
Modification to a router's name will affect the prompt of the command line
interface. For example, if the router's name is "NEC-PHILIPS", the prompt of
user view will be "<NEC-PHILIPS>".
Example
Set the name of the router to R1760.
[NEC-PHILIPS] sysname R1760
[R1760]
Syntax
system-view
View
User view
Parameter
None
Description
Using the system-view command, you can enter system view from current user
view.
For the related command, see quit, return.
Example
<NEC-PHILIPS> system-view Enter system view , return user view with Ctrl+Z.
[NEC-PHILIPS]
SOPHO
IP 5000/SOPHO IP6000
16