Interface Management Commands - NEC SOPHO IP 5000 Command Reference Manual

4.

INTERFACE MANAGEMENT COMMANDS

4.1 Interface Management Commands
debugging physical
description
Command Reference Guide
Syntax
debugging physical { all | error | cell | packet } interface interface-type interface-
number
undo debugging physical { all | error | cell | packet } interface interface-type
interface-number
View
User view
Parameter
all: Enables alarming of all levels. error: Enables error-level alarming.
cell: Enables cell-level alarming.
packet: Enables packet-level alarming.
interface interface-type interface-number: Specifies interface type and number.
Description
Using the debugging physical command, you can enable alarming for a
specified interface. Using the undo debugging physical command, you can
disable alarming for a specified interface.
Example
None
Syntax
description interface-description
undo description
View
Interface view
Parameter
interface-description: Character string describing the router interface, which is
allowed to comprise no more than 80 characters. By default, the description
string is "NEC-PHILIPS Router, xxxxxx interface".
Description
Using the description command, you can set the interface description. Using
the undo description command, you can restore the default interface
description.
This command has no special purpose or function other than identifying an
interface.
For related command, see display interface.
Example
Change the description of the Ethernet interface Ethernet 0/0/0 to "NEC-
PHILIPS Router
Ethernet interface".
[NEC-PHILIPS]interface ethernet 0/0/0
[NEC-PHILIPS-Ethernet0/0/0]description NEC-PHILIPS Router ethernet
interface
SOPHO
IP 5000/SOPHO IP6000
121