NEC SOPHO IP 5000 Command Reference Manual page 49

move
Command Reference Guide
Syntax
move filename_source filename_dest
View
User view
Parameter
filename_source: Name of the source file.
filename_dest: Name of the destination file.
Description
Using the move command, you can move a file.
If the name of the target file has the same name as an existing directory, the
target file will be moved into the directory, with the same file name. If the name
of the destination file is the same with an existing file name, the user will be
prompted whether the existing file should be overwritten.
Example
<NEC-PHILIPS> dir
Directory of *
0 -rw-2145123 Jul 12 2001 12:28:08 ne80.bin
1 -rw- 595 Jul 12 2001 10:47:50 vrpcfg.txt
2 drw- 0 Jul 12 2001 19:41:20 test
6477 KBytes total (2144 KBytes free)
<NEC-PHILIPS> dir flash:/test/
Directory of flash:/test/
0 drw - Jul 12 2001 20:23:37 subdir
1 -rw- 595 Jul 12 2001 20:13:19 vrpcfg.txt
2 -rw- 50 Jul 12 2001 20:08:32 sample.txt
6477 KBytes total (2144 KBytes free)
# Move the file flash:/test/sample.txt to flash:/sample.txt. <NEC-PHILIPS> move
flash:/test/sample.txt flash:/sample.txt Move flash:/test/sample.txt to
flash:/sample.txt ?[Y/N]:y % Moveded file flash:/test/sample.txt flash:/sample.txt
<NEC-PHILIPS> dir
Directory of *
0 -rw-2145123 Jul 12 2001 12:28:08 ne80.bin
1 -rw- 595 Jul 12 2001 10:47:50 vrpcfg.txt
2 drw- 0 Jul 12 2001 19:41:20 test
3 -rw- 50 Jul 12 2001 20:26:48 sample.txt
6477 KBytes total (2144 KBytes free)
<NEC-PHILIPS> dir flash:/test/
Directory of flash:/test/
0 drw-- Jul 12 2001 20:23:37 subdir
1 -rw- 595 Jul 12 2001 20:13:19 vrpcfg.txt
6477 KBytes total (2144 KBytes free)
SOPHO
IP 5000/SOPHO IP6000
49