NEC SOPHO IP 5000 Command Reference Manual page 27

info-center channel
info-center console
channel
Command Reference Guide
Example
Display trapbuffer information.
<NEC-PHILIPS> display trapbuffer
Trapping Buffer Confiuration and contents: enabled
allowed max buffer size : 1024
actual buffer size : 256
channel number : 3 , channel name : trapbuf
dropped messages : 0
overwrote messages : 0
current messages : 0
# Display 23 entries of information in the trapbuffer.
<NEC-PHILIPS> display trapbuffer size 23
Trapping Buffer Confiuration and contents: enabled
allowed max buffer size : 1024
actual buffer size : 256
channel number : 3 , channel name : trapbuf
dropped messages : 0
overwrote messages : 0
current messages : 0
Syntax
info-center channel channel-number name channel-name
undo info-center channel channel-number
View
System view
Parameter
channel-number: The channel number, with the value ranging from 0 to 9. That
is, the system has 10 channels.
channel-name is a channel name, with maximum length of 30 characters,
excluding "-", "/" and "\"..
Description
Using the rename channel command, you can rename the information
channel numbered channel-number as channel-name.
When naming the information channels, please note that no duplicated
channel name is allowed.
Example
Name Channel 0 as "execconsole".
[NEC-PHILIPS] info-center channel 0 name execconsole
Syntax
{ channel-number | channel-name }
undo info-center console channel
View
System view
Parameter
channel-number: Channel number, ranging 0 to 9, that is, the system has
10 channels.
channel-name: Channel name.
SOPHO
IP 5000/SOPHO IP6000
27