Terminal Service Commands - NEC SOPHO IP 5000 Command Reference Manual

3.11

Terminal Service Commands

Terminal Service of Telnet
debugging telnet
Command Reference Guide
priv-password: Encryption password, which is a character string in the range of
1 to 64 bytes.
acl: Sets the list of access view.
acl-number: Standard access list, in the range of 1 to 99.
local: Indicates the local entity user.
engineid: Specifies the engine ID associated with the user.
engineid-string: Character string of engine ID.
Description
Using the snmp-agent usm-user command, you can add a new user to a
SNMP group. Using the undo snmp-agent usm-user command, you can
delete a SNMP group user.
When the user configures a remote user for a certain Agent, the engine ID is
needed during authentication. If the engine ID changes after the user has been
configured, the user corresponding to the original engine ID will be ineffective.
For SNMPV1 and SNMPV2C, this command adds a new community name. For
SNMPV3, it adds a new user to a SNMP group.
For the related command, see snmp-agent group, snmp-agent community,
snmp-agent local-engineid.
Example
Add a user named "John" to the SNMP group named "Johngroup", with the
security level being "auth", the authentication protocol being HMAC-MD5-96
and the password being "hello".
[NEC-PHILIPS] snmp-agent usm-user v3 John Johngroup authentication-
mode md5 hello
Syntax
debugging telnet
undo debugging telnet
View
User view
Parameter
None
Description
Using the debugging telnet command, you can enable the debugging for
Telnet connection. Using the undo debugging telnet command, you can
disable the debugging for Telnet connection.
By default, the debugging for Telnet connection is disabled.
SOPHO
IP 5000/SOPHO IP6000
108