NEC SOPHO IP 5000 Command Reference Manual page 39

display bootvar
display environment
display device
Command Reference Guide
Syntax
display bootvar
View
Any view
Parameter
None
Description
Using the display bootvar command, you can display file name of the boot
software package stored in the flash on RPU.
Example
Display the program configuration information of RPU.
<NEC-PHILIPS> display bootvar
Boot file on flash is flash:/ibox.bin.
Syntax
display environment
View
Any view
Parameter
None
Description
Using the display environment command, you can display the current values
and the threshold values of the hardware system environment.
Example
Display the system environment.
<NEC-PHILIPS> display environment
GET 3 TEMPERATUREPOINT VALUE SUCCESSFULLY
environment information:
Temperature information:
local CurrentTemperature LowLimit HighLimit
(deg c ) (deg c)
RPU 34 0
VENT 31 0
Syntax
display device slot-number
View
Any view
Parameter
slot-number: Slot number.
Description
Using the display device command, you can display the system hardware
configuration information, including the in-position states of MPU, NPU,
interface card, power module, and fan module, the operating state of interface
SOPHO
(deg c )
80
80
IP 5000/SOPHO IP6000
39