AudioCodes Mediant 600 User Manual page 344

Parameter
Web: Enable Voice Streaming
[EnableVoiceStreaming]
[VoiceStreamUploadMethod
]
[VoiceStreamUploadPostU
RI]
[APSEnabled]
Web: NetAnn Announcement
ID
[NetAnnAnncID]
Web: MSCML ID
[MSCMLID]
Web: Transcoding ID
[TranscodingID]
SIP User's Manual
Channel Utilization.
Enables/disables the HTTP Voice Streaming application (play /
record).
[0] Disable = Voice Streaming is disabled (default).
[1] Enable = Voice Streaming is enabled.
Note: For this parameter to take effect, a device reset is required.
Defines the HTTP request type for loading the voice stream to the
file server.
[0] = POST (default).
[1] = PUT.
Notes:
For this parameter to take effect, a device reset is required.
This parameter is applicable only to MSCML recording.
Defines the URI used on the POST request to upload voice data
from the media server to a Web server.
Note: For this parameter to take effect, a device reset is required.
Indicates whether Voice Prompt index references refer to audio
provided by the Audio Provisioning Server (APS), or by the local
Voice Prompts file.
[0] = APS disabled. Local Voice Prompts file is used. An audio
reference in a play request (such as http://localhost/0) indicates
that the Voice Prompt at index 0 in the Voice Prompts file is
played.
[1] = APS enabled (default). An audio reference (such as
http://localhost/99) indicates that the audio segment provisioned
on the APS with segment ID 99 is played.
Note: For this parameter to take effect, a device reset is required.
NetAnn identification string (up to 16 characters) for playing an
announcement using the NetAnn interface. The application server
sends a regular SIP INVITE message with a SIP URI that includes
this identifier string and a "play=" parameter that identifies the
necessary announcement.
The default value is 'annc'.
Example 1: INVITE sip: annc@10.2.3.4;play=http://localhost/1.
Example 2: INVITE sip:
annc@10.2.3.4;play=http://10.2.3.4/Annc/hello.wav.
Media Server Control Markup Language (MSCML) identification
string (up to 16 characters). To start an MSCML session, the
application server sends a regular SIP INVITE message with a SIP
URI that includes this string.
The default value is 'ivr'.
For example: INVITE sip:ivr@10.2.3.4
Subsequent INFO messages carry the requests and responses.
Transcoding identification string (up to 16 characters) used for
identifying an incoming Transcoding call.
The default value is 'trans'.
For detailed information on Transcoding, refer to NetAnn Interface
on page 592.
344
Mediant 600 & Mediant 1000
Description
Document #: LTRT-83305