AudioCodes Mediant 600 User Manual page 109

SIP User's Manual
3.3.5.4.1 Configuring Proxy and Registration Parameters
The 'Proxy & Registration' page allows you to configure parameters that are associated with
Proxy and Registration. For a description of the parameters appearing on this page, refer to
''Configuration Parameters Reference'' on page 243.
Note:
To configure the Proxy & Registration parameters:
1. Open the 'Proxy & Registration' page (Configuration tab > Protocol Configuration
menu > Proxies/IpGroups/Registration submenu > Proxy & Registration page
item).
2. Configure the parameters as required.
3. Click the Submit button to save your changes, or click the Register or Un-Register
buttons to save your changes and register / unregister to a Proxy / Registrar.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 193.
Click the Proxy Set Table
groups of proxy addresses. Alternatively, you can open this page from the Proxy Sets
Table page item (refer to ''Configuring the Proxy Sets Table'' on page
of this page).
Version 5.8
To view whether the device or its endpoints have registered to a SIP
Registrar/Proxy server, refer to ''Registration Status'' on page 213.
Figure 3-71: Proxy & Registration Page
button to open the 'Proxy Sets Table' page to configure
109
3. Web-Based Management
110 for a description
September 2009