4.
Select the
a row is added to the table.
5.
Double-click each field to insert required values.
6.
Right-click the new entry, and then from the shortcut menu, choose Unlock rows.
7.
Click Save, and then Close.
8.
Select the IKE Table tab; the 'IKE Table' screen appears.
9.
Repeat steps 4 through 7.
5.7
Provisioning SRTP Crypto Offered Suites
This section describes how to configure offered SRTP crypto suites in the SDP.
To configure SRTP crypto offered suites:
1.
In the MG Tree, select the device.
2.
On the Tab bar, select SIP, and then click SIP Protocol; the 'SIP Protocol Definitions'
screen is displayed.
SIP User's Manual
button to add a new entry, and then click Yes at the confirmation prompt;
Figure 5-9: IPSec Table Screen
234
Mediant 600 & Mediant 1000
Document #: LTRT-83305