Configuring Radius Accounting Parameters; Configuring Fxo Parameters - AudioCodes Mediant 600 User Manual

3.3.7.2

Configuring RADIUS Accounting Parameters

The 'RADIUS Parameters' page is used for configuring the Remote Authentication Dial In
User Service (RADIUS) accounting parameters. For a description of these parameters,
refer to ''Configuration Parameters Reference'' on page 243.
To configure the RADIUS parameters:
1. Open the 'RADIUS Parameters' page (Configuration tab > Advanced Applications
menu > RADIUS Parameters page item).
2. Configure the parameters as required.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 193.
3.3.7.3

Configuring FXO Parameters

The 'FXO Settings' page allows you to configure the device's specific FXO parameters. For
a description of these parameters, refer to ''Configuration Parameters Reference'' on page
243.
Note:
SIP User's Manual
Figure 3-109: RADIUS Parameters Page
The 'FXO Settings' page is available only for FXO interfaces.
182
Mediant 600 & Mediant 1000
Document #: LTRT-83305