AudioCodes Mediant 600 User Manual page 347

SIP User's Manual
Parameter
Web: AGC Redirection
EMS: Redirection
[AGCRedirection]
Web: AGC Target Energy
EMS: Target Energy
[AGCTargetEnergy]
EMS: Minimal Gain
[AGCMinGain]
EMS: Maximal Gain
[AGCMaxGain]
Version 5.8
6 = 1.75 dB/sec
7 = 2.00 dB/sec
8 = 2.50 dB/sec
9 = 3.00 dB/sec
10 = 3.50 dB/sec
11 = 4.00 dB/sec
12 = 4.50 dB/sec
13 = 5.00 dB/sec
14= 5.50 dB/sec
15 = 6.00 dB/sec
16 = 7.00 dB/sec
17 = 8.00 dB/sec
18 = 9.00 dB/sec
19 = 10.00 dB/sec
20 = 11.00 dB/sec
21 = 12.00 dB/sec
22 = 13.00 dB/sec
23 = 14.00 dB/sec
24 = 15.00 dB/sec
25 = 20.00 dB/sec
26 = 25.00 dB/sec
27 = 30.00 dB/sec
28 = 35.00 dB/sec
29 = 40.00 dB/sec
30 = 50.00 dB/sec
31 = 70.00 dB/sec
Determines the AGC direction.
[0] 0 = AGC works on signals from the TDM side (default).
[1] 1 = AGC works on signals from the IP side.
Determines the signal energy value (dBm) that the AGC attempts to
attain.
The valid range is 0 to -63 dBm. The default value is -19 dBm.
Defines the minimum gain (in dB) by the AGC when activated.
The range is 0 to -31. The default is -20.
Note: For this parameter to take effect, a device reset is required.
Defines the maximum gain (in dB) by the AGC when activated.
The range is 0 to 18. The default is 15.
Note: For this parameter to take effect, a device reset is required.
347
6. Configuration Parameters Reference
Description
September 2009