Adding The Device In Ems - AudioCodes Mediant 600 User Manual

The device responds with the message "Password changed".
3. Close the SSH client session and reconnect using the new password.
Note:
5.3

Adding the Device in EMS

Once you have defined the IPSec communication protocol for communicating between
EMS and the device, and configured the device's IP address (refer to the device's
Installation Manual), you can add the device in the EMS.
Adding the device to the EMS includes the following main stages:
a. Adding a Region
b. Adding the device's software version file (cmp) to the EMS Software Manager
c. Defining the device's IP address (and other initial settings)
For installing the EMS software, refer to the EMS User's Manual.
To initially setup the device in EMS:
1. Start the EMS by double-clicking the EMS Client
point to Programs, to EMS Client, and then click EMS CLient; the Login Screen
appears:
2. Enter the login name and password, and the EMS server's IP address, and then click
OK.
SIP User's Manual
The default user name ("Admin") cannot be changed from within an SSH
client session.
Figure 5-2: EMS Login Screen
226
Mediant 600 & Mediant 1000
icon, or from the Start menu,
Document #: LTRT-83305