3.3.5.6.5 Configuring Keypad Features
The 'Keypad Features' page enables you to activate and deactivate the following features
directly from the connected telephone's keypad:
Call Forward (refer to ''Configuring Call Forward'' on page 170)
Caller ID Restriction (refer to ''Configuring Caller Display Information'' on page 168)
Hotline (refer to ''Configuring Automatic Dialing'' on page 167)
Call transfer
Call waiting (refer to ''Configuring Call Waiting'' on page 172)
Rejection of anonymous calls
Notes:
To configure the keypad features
1.
Open the 'Keypad Features' page (Configuration tab > Protocol Configuration
menu > SIP Advanced Parameters submenu > Keypad Features page item).
SIP User's Manual
•
The 'Keypad Features' page is available only for FXS interfaces.
•
The method used by the device to collect dialed numbers is identical to
the method used during a regular call (i.e., max digits, interdigit timeout,
digit map, etc.).
•
The activation of each feature remains in effect until it is deactivated (i.e.,
not deactivated after a call).
Figure 3-83: Keypad Features Page
134
Mediant 600 & Mediant 1000
Document #: LTRT-83305