Maintenance Actions - AudioCodes Mediant 600 User Manual

SIP User's Manual
3.4.1.3

Maintenance Actions

The 'Maintenance Actions' page allows you to perform the following operations:
Reset the device (refer to ''Resetting the Device'' on page 191)
Lock and unlock the device (refer to ''Locking and Unlocking the Device'' on page 192)
Save the configuration to the device's flash memory (refer to ''Saving Configuration'' on
page 193)
To access the 'Maintenance Actions' page:
On the Navigation bar, click the Management tab, and then in the Navigation tree,
select the Management Configuration menu, and then choose the Maintenance
Actions page item.
3.4.1.3.1 Resetting the Device
The 'Maintenance Actions' page allows you to remotely reset the device. In addition, before
resetting the device, you can choose the following options:
Save the device's current configuration to the device's flash memory (non-volatile).
Perform a graceful shutdown, i.e., device reset starts only after a user-defined time
expires (i.e., timeout) or after no more active traffic exists (the earliest thereof).
To reset the device:
1. Open the 'Maintenance Actions' page (refer to ''Maintenance Actions'' on page 191).
2. Under the 'Reset Configuration' group, from the 'Burn To FLASH' drop-down list, select
one of the following options:
•
'Yes': The device's current configuration is saved (burned) to the flash memory
prior to reset (default).
•
'No': Resets the device without saving the current configuration to flash (discards
all unsaved modifications).
Version 5.8
Figure 3-117: Maintenance Actions Page
191
3. Web-Based Management
September 2009