Cabling - AudioCodes Mediant 600 User Manual

14.3.1 Cabling

Before you can connect remotely to the OSN Server, you need to cable a PC (running
Remote Desktop Connection) to the OSN Server's iPMX module.
Note:
To cable a PC to the OSN Server for remote connection:
Connect the Ethernet LAN port of the device's iPMX module (located on the rear
panel), to the LAN network, by performing one of the following:
•
Remote PC connection: using a straight-through cable, connect the iPMX LAN
port to a switch that is connected to the IP network.
•
Local PC connection: using a crossover cable, connect the iPMX LAN port directly
to the PC's LAN port.
Figure 14-15: Cabling iPMX for Remote Connection from PC running Windows
SIP User's Manual
The remote PC must be in the same subnet as the OSN server (default IP
address 10.10.12).
654
Mediant 600 & Mediant 1000
Document #: LTRT-83305