AudioCodes Mediant 600 User Manual page 136

To configure the Stand-Alone Survivability parameters:
1. Open the 'SAS Configuration' page (Configuration tab > Protocol Configuration
menu > SAS submenu > Stand Alone Survivability page item).
2. Configure the parameters as described in ''SIP Configuration Parameters'' on page
279.
3. Click the Submit button to apply your changes.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 193.
To configure the SAS Routing table, under the SAS Routing group, click the SAS Routing
Table button to open the 'IP2IP Routing Table' page. For a description of this table,
refer to ''Configuring the IP2IP Routing Table (SAS)'' on page 136.
SIP User's Manual
Figure 3-84: SAS Configuration Page
136
Mediant 600 & Mediant 1000
Document #: LTRT-83305