Figure 3-23: Image Download Screen - AudioCodes Mediant 600 User Manual

SIP User's Manual
3. On the left pane, click Image Load to Device; the 'Image Download' page is
displayed, as shown in the figure below:
4. Click the Browse button, and then navigate to the folder in which the logo image file is
located.
5. Click the Send File button; the image file uploads to the device. When loading is
complete, the page is automatically refreshed and the uploaded logo image is
displayed in the Web interface's title bar.
6. If you want to modify the width of the image, in the 'Logo Width' field, enter the new
width (in pixels) and then click the Set Logo Width button.
7. To save the image to flash memory, refer to ''Saving Configuration'' on page 193.
Notes:
To replace the default logo with a different image using the ini file:
1. Place your corporate logo image file on the TFTP server in the same folder where the
device's ini file is located.
2. Configure the following LogoFileName and LogoWidth ini file parameters.
For a description of these ini file parameters, refer to ''Web and Telnet Parameters'' on
page 256.
3. Load the ini file to the device using BootP/TFTP (i.e., not through the Web interface).
For detailed information on the BootP/TFTP application, refer to the Product Reference
Manual.
Version 5.8

Figure 3-23: Image Download Screen

•
The logo image must be a GIF, PNG, JPG, or JPEG file.
•
The logo image must have a fixed height of 24 pixels. The width can be
up to 199 pixels; the default being 145 pixels.
•
The size of the image file can be up to 64 Kbytes.
•
If you encounter any problem during the loading of the file or you want to
restore the default image, click the Restore Default Images button.
51
3. Web-Based Management
September 2009