SIP User's Manual
3.
Select the Authentication & Security tab; the 'Authentication & Security' screen is
displayed.
4.
From the 'SRTP Offered Suites' (SRTPofferedSuites) drop-down list, select one of the
following:
•
[0] All = All available crypto suites (default)
•
[1] AES_CM_128_HMAC_SHA1_80
•
[2] AES_CM_128_HMAC_SHA1_32
5.8
Provisioning MLPP Parameters
This section describes how to configure the MLPP (Multi-Level Precedence and
Preemption) parameters using the EMS.
To configure the MLPP parameters:
1.
In the MG Tree, select the device.
2.
Select the SIP > Advanced tab; the 'SIP Advanced Configuration' frame appears.
3.
Select the MLPP tab; the following screen appears:
Version 5.8
Figure 5-10: Authentication & Security Screen
5. Element Management System (EMS)
235
September 2009