Geometry Adjustments; Horizontal Phase Adjustment - Barco R9002372 Owner's Manual

Random Access Adjustment Mode

Geometry Adjustments

The geometry adjustments have to be done only on the green image.
These adjustments are automatically implemented for the other color images.
Highlight GEOMETRY in the RANDOM ACCESS ADJUSTMENT menu, using the
arrow keys and press ENTER to display the GEOMETRY menu.
ENTER will display the Geometry menu.
EXIT will return to the previous menu.
ADJUST returns to operational mode.
Within the GEOMETRY Adjustment menu, the following adjustments are available :
- Horizontal Phase (not for internal # pattern)
- Raster shift
- Left - Right (E-W) corrections
- Top - Bottom (N-S) corrections
- Horizontal and Vertical size
- Vertical linearity
- Blanking
The convergence corrections are disabled during geometry adjustments.

Horizontal Phase Adjustment

Highlight H PHASE using the arrow keys and then press ENTER.
Note : No Horizontal Phase adjustment is
available on the internal # pattern.
For external sources :
If the raster shift is correctly adjusted, the H Phase text box is projected in the lower centre of the raster. At that moment, the
' >< ' icon indicates the centre of the raster.
Adjust the H phase control until the middle of the projected image is equal with the centre of the ' >< ' icon.
Note : If the genlocked pattern was selected, the external source will be displayed.
6-10 ____________________________________________________________________________ R5976381 BARCO CINE6 31012002
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
COLOR SELECT
or
Select with
<ENTER> to accept
<EXIT> to return
GEOMETRY
H - PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
TOP-BOTTOM (N-S)
H & V SIZE
V LINEARITY
BLANKING
or
Select with
then <ENTER>;
<EXIT> to return
GEOMETRY
H - PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
TOP-BOTTOM (N-S)
H & V SIZE
V LINEARITY
BLANKING
or
Select with
then <ENTER>;
<EXIT> to return