Color Select; Geometry Adjustments - Barco R9002411 Owner's Manual

Random Access Adjustment Mode

Color Select

Highlight 'COLOR SELECT' using the arrow keys and press 'ENTER' to display the color select menu.
Enter continues to the color select menu
Exit will return to the previous menu
Adjust returns to operational mode
Use the arrow keys to highlight a color (CRT) or combination of colors to display the image in that specific color.
To select a new color, press Enter. The color selection menu appears again on the screen. To terminate the color selection
process, press Exit.
Enter continues with the selected color or color combination.
Exit returns to the Random Access Adjustment main menu.

Geometry Adjustments

The geometry adjustments have to be done only on the green image.
These adjustments are automatically implemented for the other color images.
Highlight 'GEOMETRY' in the Random Access Adjustment menu, using the arrow keys and press ENTER to display the Geometry
menu.
Enter will display the Geometry menu.
Exit will return to the previous menu.
Adjust returns to operational mode.
Within the Geometry Adjustment menu, the following adjustments are available :
- Horizontal Phase (not for internal # pattern)
- Raster shift
- Left - Right (E-W) corrections
- Top - Bottom (N-S) corrections
- Horizontal size
- Vertical linearity
- Vertical size
- Blanking
The convergence corrections are disabled during geometry adjustments.
6 - 4 ___________________________________________________________________________ R5976101.02 BARCO CINE5 310102
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
COLOR SELECT
Select with or
<ENTER>to accept
<EXIT> to return
COLOR SELECT
RED
GREEN
BLUE
RED AND GREEN
BLUE AND GREEN
RED AND BLUE
or
Select with
then <ENTER>
<EXIT> to return
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
COLOR SELECT
or
Select with
<ENTER>to accept
<EXIT> to return
GEOMETRY
H PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
TOP-BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING
or
Select with
then <ENTER>
<EXIT> to return